Moto G bricked after flashing bootlogo

Hi all,
hope this is the right place to ask:
I recently unlocked/rooted my Moto G (2013) and flashed it to BlissPop 4.0.3. Worked very fine!
Now I tried to get rid of that ugly Bootsplash (Attention, unlocked device or so).
Bad idea. After flashing (a package from the Bliss Site via TWRP) my poor MotoG seems so be nearly dead.
+ The ugly bootsplash is not visible any more
- The Screen is black

I can still boot manually into fastboot mode, but every action (normal startup, factory reset, barcods etc.) results in device shutdown (as I assume, display black, no vibration), so that does not seem to be a boot loop.
Only option recovery the TWRP-splash shows up for a few seconds before the device switches off (or does anything else that I cannot see / hear / feel...).

Second problem (that makes things really difficult): adb does not recognize the device any more. I used it to install twrp so I know it worked a few days ago. Now it just reports a empty list of attached devises. In W7 device manager everything looks good: "Android composite ADB interface"-driver installed. I've tried to use other drivers (MotoHelper, MotorolaDeviceManager, UNiversalADBdrivers) but without effect.

Are there any options left? Many thanks in advance for eyery idea!
Greetings
Ferd

Download from this link

Nexus 7 is Bricked

Hello guys, a few weeks ago my nexus 7 has been update and did not go over the system. No I enabled USB debugger and already tried and everything to restore the system, but the following error appears: FAILED (remote: (FileWriteFailed)).
Someone who has gone through this can help me

Download from this link

Bricked new S6 Edge ... :(

Guys
I just having bad time..
I managed to brick s6 edge ..
I had 5.0.2 then tried to flash 5.1.1 and it failed it was giving me fail at start of flashing firmware .. now I downloaded some firmwares for s6 edge F version now it flashed but it is stucked on samsung galaxy s6 edge logo unded powered adroid and it won't move..
Any idea how to fix this ?
thnx

Download from this link

Soft bricked nvidia shield tablet k1? I need help please

This is my fist thread so please help a newbie out.
I've met a terrible fate. I was not thinking and ended up clearing the system files in twrp. I tried to reboot into twrp through recovery mode but it just bootloops instead of launching twrp. I've tried to re flash twrp through adb on my computer but I don't know if I have the right drivers. There are no "!" symbols and I really don't know how to reinstall twrp so i can flash a stock android os. My bootloader is unlocked but when i type "adb devices" into "minimal adb and fastboot" it doesn't display the tablet.

Download from this link

Trouble fixing up my Samsung SG-9006V hard bricked

Hello to everybody. I hope, you can understand me, because my english is terrible. I flashed the bootloader of my phone with a wrong image and I did a hard bricked, but my phone is not dead at all, so I have some hope to get it back. The first signal is that when I prees the power bottom a soft white bright appear on the left side of display, passed a second this light turn off and after turn up, and do this cyclically. The other sign is when I press the combination volume up+menu+power buttoms and appear a menu with three option, normal boot, recovery boot, fastboot, I must press volume down to ok, but when I press it dont work, dont work with any bottom I press. Well I saw in other post the sd card class 10 method to boot my phone but it didnt work. Today I dismantling it, I found 4 pins (RDX1, RDX2) (TXD1, TXD2). I assumed it was the serial port signal so, with a rs232 integrated circuit did something to connect to my pc with a usb-serial port cable, but it didnt work, odin and ADB not recognized my phone. Is there some software that work with DOS OS?. Somebody with more experience know something more?. I thinked to use a BOX software that they work with COM port but I dont know if it will work. Thank

Download from this link

Nexus 7 2013 bricked? Won't go pass Google Logo bootloop

Hello and thanks for reading!

I just got my hands on this Nexus 7, and it was working correctly for two days, but three days ago, i didn't use it that day and i think it discharged. Well, after that, it won't go pass the Google logo and it was restarting over and over...bootlooping. I tried going to the bootloader and then to the recovery to perform a factory reset, but when i selected the recovery, it went back to bootlooping.

Since i CAN access the bootloader and can get the fastboot device recognized on my computer (Windows) using the command "fastboot devices", i thought i was saved and tried flashing the stock 6.0.1 image via fastboot. That didn't work well. Everything flashed well except the System. When it tried to flash the system, i got the following error: "FAILED (remote: Unknown chunk type)". There is little information on the internet about that error. On one site, someone said that he was getting that error and sent the tablet to Asus for repair and when he got it back, they had flashed 4.4.1 on it, so i tried flashing 4.4.1 and to my surprise, when i flashed System, it said "Okey" instead of FAILED, again, i thought i was saved, but when i tried to boot the table, there is no bootloop but it just stays on the Google logo and won't go pass it. No bootloop, just stays there showing the Google logo. I let it sit there for about 20 mins, but nothing happened.

Here is the info it displays on the Bootloader:

PRODUCT NAME - flo
VARIANT - flo_16g
HW_VERSION - rev_e
BOOTLOADER VERSION - FLO-04.02
CARRIER INFO - None
SERIAL NUMBER - 08feeecf
SIGNING - yes
SECURE BOOT - enabled
LOCK STATE - unlocked

Is there something im missing? Any suggestions? I would like to fix this tablet.

Download from this link

device bricked after latest update..

Hello every one..
Am in a fix..
Jus downloaded the latest developer rom 6.1.14 for note pro and flashed it via twrp..but after flashing it I got a Msg frm twrp tat my device is not rooted..but anyhow I rebooted and since than I have not been able to boot..its just stuck at the mi logo..cant even go to recovery..its jus rebooting..cant even shut it off..i have always flashed every update after downloading the full rom every week..but I don't know what went wrong..plz help me...

Download from this link

bricked amazon fire hd 6

I installed the 5.2.0 bootloader in twrp and it wont boot PLEASE HELP. :(

Download from this link

Zopo 980 1Gb Ram Bricked

I woke up today unplugging my zopo 980 from the charger and i get no response from it. The led was on before i unpluged it from the charger. After that i got no response. I tried firmware upgrade, download, but i got error 4032 and 3149. The device is recognized by the pc and i can format it. I downloaded the official stock rom to do all these off course. Please help me and thanks for your time. :crying:

Download from this link

Help bricked device

done something stupid, I made a full wipe then restarted the system..now my computer is not seeing my phone, lost recovery, bootloader (I think) and I am stucked on the bootscreen

any ideas? thanks

Download from this link

Think i have bricked my opo past the point of no return

I was having issues flashing cm13 official nightly so I wiped the phone and installed it from scratch, it booted up fine but I was experience the common problem where the sim card wasn't recognized so i looked it up and some one had made an unofficial patch so I rebooted and installed it. When my phone rebooted it was stuck on the cyanogen boot up animation after about an hour I rebooted to try and get it into recovery to start again but after that the phone refused to boot. I read some guides online and they said to leave it charging for six hours and to try again I did and tried to boot again still nothing was happening no led, no vibration, no signs of life, no nothing. I plug it into my windows and it give me and error saying "Windows has stopped this devices because it has reported problems(Code 43) A request for USB device descriptor failed" I check adb then check fast boot nothing, try all of the different button combos still nothing. reboot into Linux every time I do "lsusb" it would hang so I read the kernel log and get this "usb 5-1.1.1: device descriptor read/64, error -110". I read some more and found a edited version of a official windows tool that is meant to unhard brick devices and factory reset so I install its drivers and launch the application it cant see the devices, it seems that qualcomm has a fall-back usb driver that is supposed to work if the phone is not responsive but I don't think my phone is getting to that state. Any thoughts of what I should do or is that the phone done. Any help would be appreciated thanks.

Download from this link